Cavity_seal
Note: There is a newer version of this specification see KBL 2.5.sr1
Kontaktkammerversiegelung Connector accessory to fill and seal a populated cavity. A Cavity_seal is a water tight non-electrical object to fill a populated Cavity.
General Information
| Attribute | Value |
|---|---|
| Owner | 2_Parts |
| Applied Stereotype | |
| Base Classifier | Part |
| Is Abstract | false |
| Derived Classifiers |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|---|---|---|---|
| Part_number | String | 1 | The part_number specifies the identifier of the Part. The format of the part number is user defined (OEM specific). |
Part |
| Company_name | String | 1 | The company_name specifies the name of the organizational context in which the Part_number is defined. |
Part |
| Alias_id | Alias_identification | 0..* | The alias_id specifies an additional part_number that is used to identify the Part in another organizational context (e.g. company). |
Part |
| Version | String | 1 | The version specifies the version identifier of the Part. A version cumulates and consolidates one or more single changes. |
Part |
| Abbreviation | String | 1 | The abbreviation specifies a short name for a Part. |
Part |
| Description | String | 1 | The description specifies additional information about the Part. |
Part |
| Localized_description | Localized_string | 0..* | The description specifies additional information about the object. The Localized_description provides the possibility to define descriptions for different language codes. |
Part |
| Predecessor_part_number | String | 0..1 | The predecessor_part_number specifies the part number of the predecessor of the Part. |
Part |
| Degree_of_maturity | String | 0..1 | The degree_of_maturity specifies the degree of maturity of a Part. Where applicable the following values shall be used: - ‘draft’ - ‘planning’ - ’equipment order’ - ‘disposition’ |
Part |
| Copyright_note | String | 0..1 | The copyright_note specifies copyright information for a Part. |
Part |
| Mass_information | Numerical_value | 0..1 | The mass_information specifies the mass of a Part. Example: Valid values for the unit of the Numerical_value specifying the mass are ‘gram’, ‘kilogram’, or also ‘kg/piece’, ‘gram/meter’ |
Part |
| Colour | String | 0..1 | The colour specifies the colour of the Cavity_seal. |
Cavity_seal |
| Seal_type | String | 0..1 | The seal_type specifies the type of a Cavity_seal. Note: There are no values pre-defined. Special values have to be negotiated between exchange partners. |
Cavity_seal |
| Wire_size | Value_range | 0..1 | The wire_size specifies the size range of the wires the seal fits. |
Cavity_seal |
Incoming Relations
| Type | Mult. | Role | Mult. | Description |
|---|---|---|---|---|
| KBL_container | 1 | Cavity_seal | 0..* | |
| Cavity_seal_occurrence | 1..* | Part | 1 |