WireMounting
Note: There is a newer version of this specification see VEC 2.1.0
A WireMounting defines the mounting of a wire end to terminal. If the contacting is required to be waterproof a cavity seal can be mounted additionally.
General Information
| Attribute | Value |
|---|---|
| Owner | contacting |
| Applied Stereotype | |
| Base Classifier | ExtendableElement |
| Is Abstract | false |
| Derived Classifiers |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|
Outgoing Relations
| Type | Role | Mult. | Mult. | Description |
|---|---|---|---|---|
| CavitySealRole | mountedCavitySeal | 0..1 | 0..* | References the cavity seal that is used for the wire mounting. |
| WireMountingDetail | wireMountingDetail | 0..* | 1 | Specifies the WireMoutingDetails, if a detailed description of the relationships between WireEnds and WireReceptions is needed. |
| WireEndAccessoryRole | wireEndAccessory | 0..* | 0..* | |
| WireEnd | referencedWireEnd | 1..* | 0..* | References the wire ends that are used for the wire mounting. The minimum cardinality is one, because a wire mounting without wire end makes no sense. The maximum cardinality is * in order to support multi crimps. |
Incoming Relations
| Type | Mult. | Role | Mult. | Description |
|---|---|---|---|---|
| ContactPoint | 1 | wireMounting | 0..* | Specifies the WireMouting defined by ContactPoint. More than one WireMounting is allowed in order to support variance. In concrete configuration the WireMounting with all referenced elements present is used. |