RingTerminalSpecification
Specification for the definition of ring terminals. These are the counterparts to bolt terminals.
General Information
| Attribute | Value |
|---|---|
| Owner | electrical_parts |
| Applied Stereotype | |
| Base Classifier | TerminalSpecification |
| Is Abstract | false |
| Derived Classifiers |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|---|---|---|---|
| identification | String | 1 | Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. For all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same. |
Specification |
| description | AbstractLocalizedString | 0..* | Specifies additional, human readable information about the specification. |
Specification |
| specialPartType | String | 0..1 | The specialPartType allows the specification of subclassifications for a PartOrUsageRelatedSpecification (e.g. different types of connector housings). |
PartOrUsageRelatedSpecification |
| voltageRange | ValueRange | 0..1 | Specifies the allowed voltage range for the connector housing. |
TerminalSpecification |
| sealingType | TerminalSealingType | 0..1 | Defines the SealingType of the Terminal. This type always refers to the sealing of the terminal itself. However, even a terminal which is not sealable can be used in sealed locations with additional measures (e.g. on the slot). |
TerminalSpecification |
| connectionALength | NumericalValue | 0..1 | Specifies the length of the terminal between the contact area (terminal reception) and the crimp are (wire reception, see diagram "Terminal Dimensions"). |
TerminalSpecification |
| overallLength | NumericalValue | 0..1 | Specifies the overall length the terminal (see diagram "Terminal Dimensions"). |
TerminalSpecification |
| boltDiameter | NumericalValue | 0..1 | Specifies the diameter of the bolt for which the ring terminal is designed for in a numerical way. |
RingTerminalSpecification |
| boltNominalSize | TerminalBoltNominalSize | 0..1 | Defines the size (diameter) of the bolt for which the ring terminal is designed for in a nominal way (e.g. "M8"). |
RingTerminalSpecification |
| thickness | NumericalValue | 0..1 | Specifies the thickness of the contact surface of the ring terminal. |
RingTerminalSpecification |
| boltType | TerminalBoltType | 0..1 | Specifies the type of the bolt to which the ring terminal is compatible. |
RingTerminalSpecification |
| outsideDimension | NumericalValue | 0..1 | Specifies the diameter of the circle around the center of the bolt which passes through the farthest outside point of the contact surface of the ring terminal. (see KBLFRM-311) |
RingTerminalSpecification |
| torsionProtection | Boolean | 0..1 | Specifies if the ring terminal is torsion protected or not. (see KBLFRM-311) |
RingTerminalSpecification |
| nutIntegrated | Boolean | 0..1 | Defines if the ring terminal has nut integrated for the fixation on the corresponding bolt terminal. |
RingTerminalSpecification |